Air Intake Valves,Oil Stop Valve,Air Intake Valves Manufacturers,Oil Stop Valve Suppliers

VHT air intake valves installed at the compressor inlet, which is control compressor capacity. At start up the air intake valves, check valves stay open a control signal is applied to close the valve and restrict the flow. We are supplying air intake valve, check valve, compressor intake valve, screw compressor control valves.

During the normal operation the air intake valve, compressor intake valve opens and closed in response to a control signal to meet the downstream air derivation. At shut down, a build –in check valve closed to prevent back flow through the compressor

Characteristics:

TFE valve seat for tight seal
Straight through design for low pressure drop
Viton cupseal for lubricant compatibility
Side parts for pressure taps.
Sizes - 1 ¾”, 2 ½” 3” 4” & 6”
Two pieces Housing
Silicon ‘O’ Ring.

REQUEST A QUOTE...

Technical Specification:

1. Operating Pressure	175 psi
2. Flow	1500scfm
3. Type of Valve	Normal closed and Normal opened
4. Material	Aluminium
5. H.P	5 to 500 H.P

Application:
VHT Oil stop valve is designed for oil injected screw compressors, rotary screw air compressor
Application.

Operation:
The pilot port must be connected to compressor discharge upstream from the Minimum pressure valve and preferably to the wet side of the oil seprator.

The inlet port must be connected to downstream side of aoil cooler, thermal valve etc, to provide PSI pressure difference between the pilot and the inlet.

REQUEST A QUOTE...

Technical specification

Inlet port	1 ½” NPT to 2” NPT
Outlet Port	1 ½” NPT to 2” NPT
Maximum Temperature	200 degrees
Body	Aluminium material
Maximum pressure	160 PSI

Application:
1. Rock Quarrying
2. Low Cost Automation
3. Spray painting
4. Air motor
5. Temperature Control System
6. Robotics
7. Film Processing
8. Cosmetic production
Advantage:
1. Low Cost and High Efficiency
2. Easy Serviceable
3. Inside & outside fully powder coating
4. Pulse operated water drain
5. Manual drain
6. Electrical automation

REQUEST A QUOTE...

Technical specification

Working Temperature	65°C
Max. Inlet Pressure	16 Bar
Filter Media	High Efficiency micro fiber glass
Thread Size	¼” to 3”
Body	Aluminium

Options
1. Automatic internal float drain
2. Differential pressure indicator
3. Timed Drain

Application:
VHT Returnline sight glass is used to suck the oil stored in the separator and Pass in through the return line sight glass to the air end.

REQUEST A QUOTE...

Technical specification

Maximum Operating Temperature	150°C
Maximum Operating Pressure	10 to 15 Bar
Housing Material	Brass
Glass Material	Borosil Brand
Thread	¼” to 1”
Rubber Material	Silicon

Advantage:
1. High Accuracy
2. Accurate and quick indications of flow rate without additional Measuring device.

Air Intake Valves

Oil Stop Valve

Moisture Filter

Return Line Sight Glass

:: Our Products ::